Enterprise hotline:020-86064436| After-sales hotline:020-26269545

News

Manufacturer of integrated audio and video solutions

News

How to connect the microphone stereo?


When it comes to audio wiring, many people who have not touched audio equipment may not know how to connect the microphone table to the audio. This article will take you to learn a set of specific connection steps for normal audio equipment. After reading it, I believe you can try it yourself!

First of all, the materials we need to prepare are a set of basic equipment for normal audio. The materials we need to prepare are: power cord, one-to-two audio cable (commonly known as Shuanglian line), sophomore line/Cannon line, computer host, mixer, wireless microphone (microphone), wireless microphone host, audio, power amplifier. Of course, these are the basic equipment. If professional audio is needed, more professional equipment is needed, such as feedback suppressor, audio processor, etc. Here is just a simple matching.

Before we begin, let's take a look at the key equipment "mixer" of our stereo. The mixer: amplify, mix, distribute, modify the sound quality and process the sound effect of multiple input signals. According to the signal processing methods can be divided into: analog mixer and digital mixer. According to the number of input channels, the mixer can be divided into: 8, 10, 12, 16, 18, 20, 24, 26, 32, etc. According to the purpose: sound reinforcement mixer, recording mixer, broadcasting mixer, disco mixer (also known as DJ mixing station). How much road is needed depends on the number of specific equipment, and it is also a waste if it is too large to use. Therefore, when we choose for customers, we usually match it according to the number of on-site equipment to ensure the cost performance. Here, the mixer plays an important role. All equipment needs to pass through the mixer, which is equivalent to a central control, responsible for managing the audio input and output of the entire system.

In the face of the mixer, it is estimated that some friends must have panicked, because I was the same before, but don't worry because there are only a few interfaces. Most of them are repeated. Let's get to know the various interfaces of the mixer:

1.Main out: The interface with the word out is usually the output end, which is the interface of power amplifier. It usually uses Cannon line or large two-core connection line, either of which is optional.

2. The microphone interface can use Cannon line or large two-core connection line, either one, there are usually multiple interfaces on a mixer. The corresponding fader below the microphone interface is the volume key, and the volume decreases from top to bottom, otherwise it increases in turn.

3. The computer host interface uses audio cable, the host terminal is inserted into the 3.5mm earphone port, and the mixer is inserted into the red and white double lotus port. There are usually two ports on a mixer that can use audio cables.

4.L main R: main volume key, l is the left channel and r is the right channel. If the volume fader is at the bottom, there is no sound for all devices. If the volume fader corresponding to L is on the top and the volume fader corresponding to R is on the bottom, there is sound in the left channel and no sound in the right channel. On the contrary, there is sound in the right channel and no sound in the left channel.

After understanding how to wire, the FM pairing of the microphone will be completed. Only a complete system such as the microphone and the host can work correctly. Next, let's learn about the specific pairing method of the microphone!

1.(First) Press the "▲" key for 2 seconds to enter the frequency selection state, press the "▲" and "▼" keys to adjust to the required frequency (I .e. a string of numbers displayed by the microphone) (press the "▲" and "▼" keys for quick frequency selection), and press the "SET" key to take effect.

(Second) Long press the "▼" key for 2 seconds to enter the automatic frequency sweep state (do not turn on the transmitter during automatic frequency sweep).

2. Press the transmitter key to work the transmitter.

3. To align the transmitter's infrared frequency-to-frequency receiving lamp with the host's infrared frequency-to-frequency spotlights (within 1 meter distance), press the host's "SET" key to frequency-to-frequency (the transmitter display screen lights up once, and the host's RF display screen shows a signal).

Note: Each transmitter can be matched to the host A. B .C.D channel.

The above is the wiring of the whole set of audio and the matching method. I hope it will be helpful to you!

Links